Reset Your Holosun EPS Carry Red Dot System

Wiki Article

Need to return your Holosun EPS Carry Red Dot to its default settings? A easy factory reset can solve a range of troubles. Here's how to execute a full factory reset on your Holosun EPS Carry:

* First, find the minute reset button on the bottom of your red dot .

* Use a fine object like a paperclip to activate and maintain the reset switch for about 5 seconds.

* You'll certainly observe a brief blink on the display to indicate that the reset is complete.

* Remove the reset lever and your Holosun EPS Carry should now be back to its default settings.

Returning to Your Holosun EPS Carry to Default Settings

Sometimes your Holosun EPS Carry may need a little recalibration. This can occur if you've made some adjustments and want to go back to the factory settings. Thankfully, it's a pretty straightforward procedure. First, locate the small switch on the rear of your sight. This is the recalibration button. Next, use a small tool like a pen or paperclip to gently depress the switch. Hold it down for approximately 5 seconds until you see the display flash. Release the switch and your Holosun EPS Carry will now be back at its factory defaults.

Factory Reset for the Holosun EPS Carry Red Dot Sight

Performing a factory reset on your Holosun EPS Carry is a straightforward process that will restore it to its original settings. This can be helpful if you've made some changes to the sight's configuration and want to revert or if you're experiencing any problems.

To factory reset your Holosun EPS Carry, first verify that the red dot is powered on. Then, press and maintain both the function button and the power button together for approximately 5 seconds. You will know that the reset has been successful when the red dot blinks rapidly or you hear a confirmation tone.

Once the reset is complete, your Holosun EPS Carry will be back to its factory defaults. This means all custom settings, such as brightness levels and reticle patterns, will have been removed. You will then need to reprogram the sight according to your preferences.

Master the Essentials: Holosun EPS Carry Red Dot Reset

A solid control on your firearm is paramount, and a reliable red dot sight will significantly improve your accuracy. The Holosun EPS Carry series stands out for its robust build and user-friendly design. How to factory reset holosun eps carry red dot However, even the most dependable red dots can sometimes become misaligned. This guide will walk you through the straightforward process of resetting your Holosun EPS Carry red dot, ensuring it's accurately aligned for optimal performance.

With a few simple steps and attention to detail, you can keep your Holosun EPS Carry red dot functioning flawlessly. Remember, regular maintenance and calibration are essential for maximizing the accuracy and reliability of any firearm optic.

Return Your Holosun EPS Carry to Factory Settings

Restoring your Holosun sight to factory settings is a easy process that can be beneficial in various situations. If you're experiencing problems with your EPS Carry or simply want to reset all user-configured settings, following these steps will guide you through the procedure. First, identify the reset button on the side of your sight. It's usually a small lever. Next, use a small tool to push the reset button and hold it down for 5 seconds. You should see a flashing LED indicator, which signifies that the reset is successful. Release the button and your EPS Carry will power off and on automatically. Once it's back online, you can check that your settings are now at their default values.

Return to Factory Defaults

In case your Holosun EPS Carry Red Dot isn't operating as expected, a factory reset can often resolve the issue. To start this process, first locate the tiny button on the side of your optic. With your fingertip, {press and sustain it for a period of approximately 10 seconds. You'll observe an indication on the screen that confirms the reset is in effect. Once complete, your Holosun EPS Carry Red Dot will be back to its default settings.

Report this wiki page